20 Ways To Fix Android Hotspot Not Working On Android

Hotspot is known for its excellent connectivity features built into Android. However, it is clear that various types of errors and malfunctions can occur, including the error “Android Hotspot is not working”. This problem may prevent you from using your mobile hotspot.

If you have the same problem, then it’s time to find ways to solve it.

In this guide, I will show you some best practices to easily solve the “Android Hotspot Not Working” error.

Let’s look at the solutions ……

Troubleshooting methods for fixing a malfunctioning Android hotspot


Method 1: Perform a forced restart of the device.

Often a simple reboot can solve many problems that have occurred for no apparent reason. This solution requires you to perform a forced reboot on both devices – on one you unlock your Internet, on the other you take it.

To restart the device :

  • First, press and hold the power button on the Android device.
  • Once the pop-up window appears on your phone, tap the Restart option.


Once your Android phone has successfully rebooted, check whether the mobile hotspot is working properly or not. If not, try the following method.

Method 2: Check whether the mobile hotspot is activated or not.

Before making a decision, check whether the mobile hotspot is enabled or not. If not, turn on your AP first.

Here are the simple steps:

  • On your Android phone, go to “Settings” and touch “Mobile Access Point”.
  • From there, click on the mobile access point again and press the OFF/OFF button.
  • Just click on “OK.”


Method 3: Examination of balance sheet data

One of the most common things we always forget to do is to check the balance of the data. If you find that your data is out of balance or inactive, this could be the reason why you cannot use your mobile hotspot and you get a mobile hotspot that does not work due to Samsung’s error.


Method 4: Make sure mobile data is on or off.

Make sure you enable mobile data, otherwise you will not be able to use the hotspot and you will get the error message “Android Hotspot Not Work”. If it is already enabled, just turn on/off mobile data.

Follow the instructions below to activate the cell phone data :

  • Open the Settings application and tap Connections or Wireless and Networks.
  • Here you need to click on “Mobile data or cellular data”.
  • Here you will find some devices for which you need to select “Data usage”.


You can also activate cell phone data by dragging up the screen of your Android phone, where you will see the option “Mobile data”, just tap it once.

Method 5: Checking the Wi-Fi connection and password

Did you forget to activate the Wi-Fi connection of the device you are trying to connect to?

If so, you need to choose another method to fix the Android access point error. If not, turn on the Wi-Fi connection now.

Just go to “Settings” and press “Network and Internet.” Then press “Wi-Fi” to activate it. Next, make sure you have entered the correct password to use the hotspot.


Method 6: Delete cached files

Yes, such problems often occur because of the system cache. So, if you have tried the manual fixes above and still cannot solve the Android hotspot problem, you should try to solve the problem by clearing the cache files of your device.

However, this process is somewhat complicated. You should therefore pay particular attention to the following instructions.

Step 1: First, press and hold the volume and power buttons to restart the device in recovery mode.


Step 2: Then select the “Empty Cache” section to empty all temporary files.

Method 7: Turn off the battery saver mode.

In general, many people use battery saver mode to prevent applications from running in the background to save battery power. While this is a very interesting feature, it is quite possible that it will prevent you from using your Android hotspot. Start with the following steps:

  • Open the Settings application on your Android device and go to the Screen Saver option.
  • Here you need to click on “Battery Drive.”
  • Press the “Off” button again.


Method 8: Check whether other devices connect to the same AP or not.

If you cannot connect your personal Android phone to a particular access point, you should try to solve the problem by connecting other devices to the same access point. This will help you find the exact cause of the problem.


Method 9: Hold your Android phone to say goodbye.

Always try to keep your phone up-to-date with the latest Google updates. In many cases, this can be the reason why the Android access point accidentally fails to work. This is because an outdated device can often cause all sorts of problems, including a non-functioning access point.


Method 10: Updating the data profile

If you are still getting the “Mobile hotspot not working” error message from Samsung, you may need to update the data profile. You can do this by following the steps below:

  • On your Android phone, open Settings and press Apps.
  • Then go to “Settings” and click on the “System Updates” option.
  • Now click on “Update Profile.”


Method #11: Remove the Culprit applications.

Sometimes newly installed applications can also be responsible for Android hotspot error not working. However, it is difficult to find the guilty application if you have installed several applications just before.

However, it is a good idea to remove corrupted applications that may prevent you from using mobile access points.


Method #12: Remove password security access point

Although the password protects your AP from being used by other users because it is encrypted, in many cases this encryption can cause many problems when connecting to your AP. Often the AP will work better with the device if you clear the secure password.


Here are the necessary steps:

  • First go to your “configuration application”, then to “Network and Internet”.
  • Then you need to select “Access Point and Tethering” >> “Wi-Fi Hotspot”.
  • Here you only need to set the security settings to no.

Method #13: Turn off the smart grid switch

You should be familiar with the Smart Network Switch, which is specifically designed to work in the background to see if you are getting a stable connection to the Internet. In rare cases, this can lead to connection problems. Perform the following steps:

  • First, go to “Menu” and click on “Settings” < “Wi-Fi”.
  • Click again on the “More” button in the upper left corner.
  • Finally, click on “Smart Network Switch” and easily disable it.


After turning off the smart grid switch, you can use the access point with your cell phone.

Method #14: Add the device to the authorized devices on the AP.

To connect your Android phone to authorized devices in the access point, follow these steps:

  • Go to the “Settings” application on your cell phone and click on “Connections”.
  • Then go to “Mobile Hotspot and Cell Phone Tethering” and click on “Mobile Hotspot” again.
  • Here you have an option called “Allowed Devices”, just press it!


  • You must now enter the name of the device and instrumentation.
  • In the last step, click “Add” to continue.

Method No. 15: Disable automatic hotspot switching

On some devices, the mobile hotspot automatically disconnected after a few minutes if no device was connected.

If automatic switching between access points is enabled on your device, you must disable it by following the steps below :

  • First go to “Settings” and then click on “Network and Internet”.
  • Then select the “Access Point and Connection” option and click on the Wi-Fi hotspot, then click on “Advanced”.
  • Just move the cursor to “Disable access point automatically”.


Method #16: Correcting NPA Settings

Sometimes invalid access point name settings can also cause a similar problem. In general, it is important to map the APN (device internet & bound mobile internet) before connecting.

Therefore, check the settings for the name of your device’s access point (the Internet you want to share).


To check the settings of your PDA, follow the instructions below:

Go to “Settings”, then click on “Connections” and select APN. Then you should check the details of the two APN sites; they should match. Now restart your device and enable the APN.

Method #17: Check the maximum number of devices allowed.

If you are connected to your mobile hotspot but do not have internet access, you should check the “Maximum allowed connection” option. By default, Android only allows the connection of 8 devices. If you are the 9th trying to connect to the same AP, you will not be able to use the Internet.

Here you need to check the maximum number of devices allowed on the shared device.

Go to Wireless & Networks, then to Bind and portable AP. Then click on “Portable WiFi Hotspot”, then click on “Configure Hotspot” >> “Maximum Connections Allowed”.

Solution #18: Restore the default settings of the device.

If you’ve reached the point where all of the above solutions don’t solve your Android hotspot problem, then you have a tough decision to make: reset your phone to factory settings.

One thing to remember is that when you factory reset your device, everything on your Android phone will be erased, including contacts, photos, settings, videos and other information.

Before using this method, you must back up all your data. You need to perform the following steps:

  • Open the “Settings” program and go to the “System” section.
  • Now select the Advanced option and click Reset.
  • Press “Clear all data (reset)”.


Method 19: send your phone to a repair shop

I can’t solve the android’s “hotspot not turn on” error? If yes, then there must be hardware problems that can only be fixed by experts. In this method, you need to take your phone to a service center and have it repaired by experts.

Method #20: fix a failed Android hotspot with the Android repair tool

If the above solutions fail to fix the error “Android hotspot is not working”, it may lead to a serious problem. In this situation, you can use the most reliable Android recovery software.

This tool has the ability to correct all errors such as – Applications keep crashing, stuck in boot loop, black or dead phone screen, Play Store does not work, Android system user interface does not work and many more.

The best feature of this program is that it supports almost all Android devices. It is very easy to use and gives 100% repair result. Therefore, it is recommended by professionals and experts.

http://server.digimetriq.com/wp-content/uploads/2020/11/How-To-Restore-Contacts-From-Gmail-4-Effective-Ways.png http://server.digimetriq.com/wp-content/uploads/2020/11/How-To-Restore-Contacts-From-Gmail-4-Effective-Ways.png http://server.digimetriq.com/wp-content/uploads/2020/11/1605636011_15_How-To-Restore-Contacts-From-Gmail-4-Effective-Ways.png http://server.digimetriq.com/wp-content/uploads/2020/11/1605636011_15_How-To-Restore-Contacts-From-Gmail-4-Effective-Ways.png

It’s time to sum up.

Well, it is quite difficult to fix the “Android Hotspot Not Working” error, but not impossible. If this problem cannot be fixed in time, it will sometimes lead to problems.

So, to fix Samsung mobile hotspot malfunction, we have discussed the 20 best ways to solve this problem.

If the instructions do not solve this problem, you have another solution: the Android repair program. So it is up to you to choose which method you want to work with. Among all the solutions, there is definitely one that will help you in your case.

I hope now you have an answer on how to solve my Android mobile access point error. If you have any questions, please leave them in the next part of this blog.

You can connect with us through our social pages such as Facebook and Twitter.

Sophia Lui is a professional blogger and SEO expert. She loves writing blogs and articles about Android and iOS phones. She is the founder of Android-iOS data recovery and always looks forward to solving problems related to Android and iOS devices.

Frequently asked questions

Why is my mobile hotspot not working on Android?

Make sure the connected Wi-Fi device is turned on. Update the latest firmware for all devices. Restart the device or your phone. Restart the devices you want to connect to the hotspot.

Why is my mobile hotspot not working?

My mobile hotspot is not working. Make sure the mobile hotspot is enabled on your phone: Android – from the home screen, select > Settings > Advanced Networks > Wi-Fi hotspot. Windows – from the home screen > select Settings > “Internet Sharing” > “Enable Sharing”.

Why can’t I access the Internet from my access point?

Contact the modem/router or your operator about the missing data. If everything works fine from your phone, try another device, connect another device to the access point and see if it connects.

Related Tags:

ans ul40 hotspot not working,oneplus 3 hotspot no internet,oneplus 7 pro hotspot,pixel 4 hotspot authentication failed,android 10 wifi no internet,who is connected to my hotspot android 10,mobile hotspot connected but no internet,why is my hotspot not working iphone,mobile hotspot not working windows 10,mobile hotspot not working samsung,why won’t my hotspot work verizon,why is my hotspot not working straight talk,can’t connect to iphone hotspot,mobile hotspot not working straight talk,franklin t9 mobile hotspot troubleshooting,hotspot not working iphone,portable hotspot error,data connection not available,samsung galaxy s20 hotspot not working,samsung a20 tethering,mobile hotspot not working android,galaxy s7 hotspot not showing,mobile hotspot connected without internet,unable to connect mobile number not found,mobile hotspot not working samsung a20,mobile hotspot not working samsung s10,samsung galaxy a20 hotspot straight talk,s20+ hotspot authentication error,samsung s9 wifi hotspot,mobile hotspot not working verizon,galaxy s7 no hotspot option,samsung tablet won’t connect to hotspot,mobile hotspot samsung s20,s20 ultra no internet,data tethering error galaxy s20,bluetooth tethering authentication failed,mobile hotspot connected but no internet android,how do i fix my android mobile hotspot,can’t connect to hotspot android,android 9 hotspot not working,can’t turn on hotspot android,why is my hotspot not working on other devices