Owning a home means you are never really done with the work around it. Even if everything is fine and well you have to maintain it regularly in order for it to stay that way. This is something each and every homeowner learns sooner or later. When you have any amount of property tied to your name, it is a constant investment and improvement especially the place you call home. In such a situation there can often be mistakes and disasters if you are not careful. More precisely, things of that nature tend to happen when you want to do things on your own and carry out DIY (do it yourself) projects.
In this article we focus on exactly this problem and try to offer some useful solutions that can help the average homeowner become a better self-reliant handyman and contractor. There are numerous things around the house you can be doing on your own and saving money since you are not hiring anyone else. While professionals are much better at these things since it is their job, you do not always need one and there is always something new to be learned. Mind however that without the proper knowledge and information on your side you could damage and even ruin something beyond repair.
If you want to find out more about all of this, we strongly suggest that you check out repairdaily.com and get some key info about home fixes and improvements. In the meantime, let us dive deeper into the disasters and mistakes you definitely want to avoid when doing it on your own.
1. Realizing it is too much
Not necessarily a specific job to start things of but a thing that tends to happen when you have already started doing something and there is no turning back. There is hardly a worse feeling for a proud homeowner who thought they can handle some repair or improvement than the moment they realize they actually cannot. Once you start chopping, sanding, rearranging, or anything else, you are full of enthusiasm and think it will keep going well. Sooner than later, there will be a step you know nothing about but it will be impossible to turn back and you cannot exactly leave things unfinished. This is where most people actually decide to call the pros for help, something that should have happened in the first place. Realizing you were far better off with the experts doing this one comes suddenly and it is usually a shock, while the job itself tends to become more expensive because of the additional work you did on your own.
2. Measuring wrong
Measuring things seems like the basics for all work that comes after and the initial step that should be taken very seriously. You cannot actually make up for what you removed once you cut it, so making sure the measurements are right is key. That is why they exist, to ensure little pieces come together exactly as they should. If you fail to measure accurately, you will have an amazing recipe for disaster on your hands and nothing else will be possible down the line. Even a single wooden beam or a smaller part is enough to ruin your work. All DIY projects must start with the right measuring equipment, skills, and practices. Otherwise, mistakes and disasters happen and not only will you be left with useless material but you will also have to do it all again or call somebody for help. There is a saying in multiple languages that goes something like, “measure three times and only cut once,” a logical piece of advice that tells us to measure, re-measure, and then re-measure again just to make sure before we proceed to cut. So, make sure you have the right tool and equipment. You can find companies such as Lakeside-hire that rent all types of equipment.
3. Using wrong tools
Most DIY instructions start off by telling you exactly which tools you need in order for the project to be done well and as it should. If you lack the proper tools and other equipment, it is always best to borrow it or purchase it instead of trying to find something else. Using the wrong tools will surely make your work harder or even impossible.
Frustration tends to build up as you go and you will eventually make a costly mistake. Taking too much off a certain part or ruining the delicate parts with big tools happens all the time. This then leads to more unnecessary work that could have been avoided had you found the right tools for the job. Building, renovation, and home improvement are all delicate and highly skilled jobs and the tools we have are extensions of our bodies as well as remedies for their shortcomings. We cannot do it by hand so we invented tools. And now you are using the wrong ones to do things faster or because you think it could work. It will not and you will pay more in the end, to cover the damage you did yourself and then for the contractors who will have to come in after all.
4. Disregarding safety
Last but not least, we have the most important thing people tend to forget or ignore when doing their own work around the house. This is of course the safety of you and others. Doing something in the comfort of your home often feels safer than it is. You know the terrain, the potential dangers, and all the hidden nooks and crannies so naturally you feel comfortable moving around and doing whatever. This, of course, is no way to do physically dangerous jobs that involve electric tools and other dangerous equipment. First and foremost, before you start doing anything, you should go out of your way to protect yourself, other members of your family, and the surrounding elements of your home that are not being treated. You should wear protective eyewear and headwear as well as gloves. The part of the home where you are working needs to be separated with signage and be obvious, and make sure the kids know they are not allowed near it. Lastly, protect the immediate area surrounding the workplace with tape, plastic foil, cardboard, or whatever else depending on the job at hand.