Driver power state failure [Windows 10, Nvidia, SSD]

Note: If you have found the driver that caused this blue screen, you should check the manufacturer’s website for an updated version that is compatible with your Windows operating system to prevent the driver error from occurring again.

Avoid these formalities with the best driver removal tool!

3. Perform an SFC scan.

  1. Press Windows + X to open the Win + X menu and select Command Prompt (Admin) from the list. If the command line is not available, select PowerShell (Admin).
    Error: The file name is not specified.
  2. When the command prompt opens, type sfc /scannow and press Enter to run it.
  3. The scanning process is now underway. Note that the SFC scan can take about 10 minutes, so do not interrupt it.

If you cannot perform an SFC scan or if the scan cannot resolve the problem, users recommend performing a DISM scan instead. To do this, follow these steps:

  1. Open a command prompt as an administrator.
  2. Run the following commands:
    DISM.exe /Online /clean image /scanhealthDISM
    .exe
  3. After running both commands, check if the problem is solved.

If you could not run the SFC scan before, you should run it after the DISM scan. Once you have run both scans, the problem should be completely solved and the error message should no longer be displayed.

If you get a notification from the driver that the power is off, you can fix it by following the instructions above.

Change the power settings

  1. Press Windows + S and go to Control Panel. Select Control Panel from the list.
    Error: The file name is not specified.
  2. When the Control Panel opens, find “Power Options” and click on it.
    Error: The file name is not specified.
  3. Press the selection button representing the power switch.
    Error: The file name is not specified.
  4. Now click the Change Settings button, which is not currently available.
    Error: The file name is not specified.
  5. Disable the Quick Start (recommended), Hibernate, and Hibernate options. Click the Save Changes button.
    Error: The file name is not specified.

Sometimes in Dell devices, driver power mode error can occur due to power settings.

According to users, you can easily solve this problem by disabling certain power settings, as indicated above.

5. 5 Modification of the parameters of the electricity plan

  1. Access menu options. Locate the currently selected plan and tap Change Plan Settings.
    Error: The file name is not specified.
  2. Press the Change advanced power settings button.
    Error: The file name is not specified.
  3. You will now see a list of parameters. Open the Hibernate section and verify that the Hibernate and Hibernate settings are set to Never. Make sure that everything under the power and flap button is set to Never. Now click Apply and OK to save your changes.
    Error: The file name is not specified.
  4. Optional: Set the Graphics or PCI Express and Lnk State Power Management settings to maximum power. You can do the same for the wireless adapter settings.

If you are using a laptop, users recommend removing the battery and plugging it into an electrical outlet.

Once these changes are made, the hibernation and hibernate functions will be completely disabled and the problem should be resolved.

If you use these functions often, you should try another solution.

6. disabling or uninstalling your antivirus software

Error: The file name is not specified.

Anti-virus software is very important, but sometimes your anti-virus program can affect Windows and cause the driver to crash.

To resolve this issue, we recommend that you temporarily disable the antivirus software and see if this resolves the problem. If not, you may need to uninstall the antivirus software completely.

Many antivirus vendors offer tools to remove their software, so be sure to download one for your antivirus.

After you have completely uninstalled the antivirus program, check if the problem persists. If not, install the latest version of your antivirus software or switch to another antivirus solution.

Many users have reported problems with Avast Antivirus, but other antivirus programs can also cause this problem.

To remove your antivirus software and all its files, it is recommended to use a special uninstaller, such as IOBit Uninstaller.

Get IOBit Uninstaller.

Migrate the graphics card drivers to an older version.

  1. Open Device Manager.
  2. Go to “Display Adapters” and double-click on the graphics card.
    Error: The file name is not specified.
  3. When the “Properties” window opens, go to the “Drivers” tab and click the “Invert Driver” button.
    Error: The file name is not specified.
  4. Wait for the process to complete.

If the “Roll Back” option is not available, you will need to uninstall the graphics card driver through Device Manager. You can also use the display driver uninstaller to completely remove all files related to the graphics card.

After uninstalling the driver, go to the graphics card manufacturer’s website and download the old version of the driver. After installing the driver, check if the problem is solved.

This problem usually occurs with Nvidia graphics cards, but you can try this solution with other graphics cards as well.

Sometimes a driver power status code shutdown error can occur that is due to the drivers of the graphics card.

To solve this problem, it is recommended that you revert to the old driver as we showed you earlier.

8. Change the power settings in the Nvidia Control Panel.

Error: The file name is not specified.

  1. Open the Nvidia Control Panel.
  2. Select Manage 3D settings in the left pane.
  3. In the right pane, select the highlighted graphics card as your preferred GPU. Find the power management mode in the settings list and select Prevent Maximum Performance.
  4. Save the changes and see if this solves your problem.

According to users, upgrading to maximum performance solved this problem for them, so definitely give it a try.

This mode consumes more battery power, so keep this in mind if you are using a laptop. If you are using AMD graphics, you can find similar settings in the Catalyst Control Center.

Depending on the user, a driver power status error may occur due to power settings. This problem is common with Nvidia graphics, but you can fix it by following the steps above.

9. changing the power settings of the unit

  1. Open Device Manager.
  2. Find your network adapter and double-click it to open its properties.
    Error: The file name is not specified.
  3. Click the Power Management tab and uncheck the Allow computer to turn off power to save power check box. Click OK to save your changes.
    Error: The file name is not specified.

After that, the problem should be completely solved. Remember that your PC has several devices that support this feature, so you should disable it for all problematic devices.

Occasionally, a Windows driver error can occur due to power settings. Many devices can be turned off to save power, but sometimes this option can cause this problem.

That’s it, after following the above steps, you can connect to your Windows 10 as usual.

If you have any questions about this, please send us an email and we will make sure that your problem is solved as soon as possible.

Frequently Asked Questions: Learn more about driver errors

  • How can I fix the driver’s power failure?

Here are some solutions to this problem: update drivers, disable external hardware, run the System File Checker. See our step-by-step guide for more solutions to driver performance issues.

  • What is a driver power failure?

Driver power failure is a “blue screen of death” error caused by installing incompatible drivers. It usually occurs at computer startup. The error also indicates that the driver is in an inconsistent or invalid power state.

  • How can I update all my drivers?

Open Device Manager. Locate the driver you want to update and select Update Driver. Select Automatically check for updated drivers.

Editor’s note: This article was originally published in October 2017 and revised and updated in February 2021 to ensure timeliness, accuracy and completeness.

Frequently asked questions

What are the causes of conductor voltage failure?

Driver power failures are usually caused by the computer or device driver going into standby mode while you are still using the device. Windows will send a warning to the camera if necessary, and if the camera does not respond in time or at all, Windows will report a driver power failure.

How can the failure of the current driver be remedied?

Disabling or removing the antivirus software The antivirus software is very important, but sometimes your antivirus software can interfere with Windows and cause the driver to crash. To solve this problem, we recommend that you temporarily disable the antivirus software and see if this solves the problem.

What is a driver power failure?

How do I correct the DRIVER_POWER_STATE_FAILURE error on the blue Death Error screen … Usually this error informs about driver problems: the installed drivers are incompatible or not working properly. A device driver is software that tells the operating system and other software how to communicate with a particular hardware …

Related Tags:

driver power state failure windows 10 2020,driver power state failure windows 10 reddit,driver power state failure when gaming,driver power state failure windows 10 2019,driver power state failure when shutting down,driver power state failure while installing windows 10,driver power state failure windows 7,driver power state failure stuck at 100