FE Samsung Galaxy S20 has Exynos 990 chipset (7nm+), Octa-core CPU/processor specs (2×2.73GHz Mongoose M5 and 2×2.50GHz Cortex-A76 and 4×2.0GHz Cortex-A55), Mali-G77 MP11 GPU, 6.5in display, 101.0cm2 (~84)8% screen-to-body ratio), Super AMOLED, 120GHz, HDR10+, 1080 x 2400 pixels, 20:9 ratio (~407 ppi density), permanent display, 128GB internal storage/RAM 6GB RAM, 128GB 8GB RAM, 256GB 8GB RAM, 12MP triple-sensor main camera, f/1.8, 26mm (wide angle), 1/1.76in, 1.8µm, Dual Pixel PDAF, OIS / 8 MP, f/2.4, 76mm (telephoto), 1/4.5in, 1.0µm, PDAF, OIS, 3x optical zoom / 12 MP, f/2.2, 13mm, 123˚ (ultra-wide), 1/3.0in (ultra-wide), 1..12µm, 32MP auto camera, f/2.2, 26mm (wide), 1/2.74, 0.8µm, 4500mAh Li-ion battery, non-removable, 25W fast charging, 15W wireless fast charging, 4.5W wireless reverse charging, USB Power Delivery 3.0.
If you are an Android lover and want to root and restore TWRP on your beloved device, then you have landed on the right page. We will soon walk you through the process of installing TWRP and rooting the Samsung Galaxy S20 FE SM-G780F/DSM. You should be aware that the TWRP flash and rooting process will irrevocably disable the KNOX warranty bit, voiding the warranty and preventing you from receiving firmware updates, as subsequent OTA updates will be disabled.
TWRP has an attractive hardware design and user interface (UI). If you follow this guide, you can install the latest version of TWRP for Samsung Galaxy S20 FE SM-G780F/DSM. You can download TWRP Recovery from the links in the sample section of this article. Please note that this is an official TWRP restore and is only for Samsung Galaxy S20 FE SM-G780F/DSM (Confirm the model by going to Settings > Aboot). The process described below is only for rooting and installing TWRP on Samsung Galaxy S20 FE SM-G780F/DSM, do not try this method on any other device.
If you want to unleash the full potential of your Samsung Galaxy S20 FE SM-G780F/DSM hardware, the main task is to root and TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a rooted device and a flashed TWRP recovery, you can install any custom ROM, modules, kernels, Xposed, etc, as well as many applications that require root access to function properly.
Infinix Smart 2 Pro X5514 Installing/upgrading to Android 8.1 Oreo Stock…
ALWAYS KNOW how to root the Geyer Alpha A1 and install TWRP Recovery
6. January 2019.
Brief information and benefits of TWRP recovery
TWRP (Team Win Recovery Project) is an open source community development project. Flashing TWRP allows your device to install any firmware, boot your smartphone, change zip files for settings, Xposed modules for settings, one-click root processes and provisioning processes. You can also make a full backup of Nandroid and restore it later, flash the image file with one click, remove bloatware, overclock and underclock. With TWRP, you can easily erase, cache and clear data after flashing an image file to reflect changes and correct minor errors caused by caching.
To install TWRP, your Samsung Galaxy S20 FE SM-G780F/DSM phone must have an unlocked bootloader. This means that you first need to unlock the bootloader to root the device, and also perform a configuration.
Denial: Although AndroidWeblog.com covers everything very clearly so that our readers get exactly what they want, there is always a small chance that major problems may arise from the steps listed here. It is therefore in the user’s interest to carry out the steps very carefully in order to avoid accidents with the device.
Rooting and flashing a custom ROM will definitely invalidate your device’s warranty and AndroidWeblog.com cannot be held responsible in any way for invalid warranties or tinkered with devices.
Check the model number, which should be as follows:
- Samsung Galaxy S20 FE [Models : SM-G780F, SM-G780F/DSM] Android 11, One UI 3.1 [Exynos chip] [Device Encryption: r8s]
- Samsung Galaxy S20 Edition fan
- Samsung Galaxy S20 Lite
- Samsung Galaxy S20 FE 4G
- Country/Region : International/World
You should make sure you read the disclaimer carefully before you routinely use your phone and agree to continue taking the risk.
The phone must be 70% charged, otherwise complications may occur during the experiment. Why take the risk of fully loading it.
If you plan to root your phone or install a custom ROM, it’s a good idea to back up your phone. Back up all your media like photos, videos and everything on your PC, as well as your contacts to the cloud.
You must enable the USB debugging option by going to Settings, Apps and Development Options.
Downloads for rooting Samsung Galaxy S20 FE SM-G780F/DSM (r8s) Android 11, Single UI 3.
Download the Samsung USB drivers here (if you already have drivers installed on your PC, you can skip this step).
Download Odin from here.
Download TWRP recovery for Samsung Galaxy S20 FE SM-G780F/DSM here:
TWRP Repair 3.5.0 (Android 11 One UI 3.0)
READ also how to root the Huawei P20 Pro (Charlotte) and install TWRP Recovery.
(Exynos variants of the S20 FE)
Download SuperSU from Chainfire from here.
Download Magisk Manager from here.
You can download the .zip of ianmacd multidiscabler here (credits).
unlock Samsung Galaxy S20 FE SM-G780F/DSM (r8s) Android 11 One UI 3.
Step one: Make sure USB debug mode and OEM unlock are already enabled on your smartphone. To do the same, go to Settings > About > and then press the version number 7-10 times in a row, which will enable USB debug mode and OEM unlock. So the process is clearly not complicated.
Step two: Then simply turn off your Samsung Galaxy S20 FE SM-G780F/DSM. Now it’s time to go into boot mode. To enter boot mode, press the Volume Up and Volume Down keys simultaneously and connect your smartphone with a USB data cable. When the device enters the boot mode and the boot mode screen appears, just press the volume up button, it will unlock the Samsung Galaxy S20 FE SM-G780F/DSM bootloader.
Warning: Unlocking the bootloader erases the user data on your device. After setting up your device, check the OEM unlock in the settings. If not, it will be locked again.
Steps to flash/install TWRP 3.5.0 on Samsung Galaxy S20 FE SM-G780F/DSM (r8s) Android 11, One UI 3.1
Supported: Exynos variant of Samsung Galaxy S20 FE models: SM-G996B, SM-G996N with Android 11, One UI 3.1)
Step one: First, enable USB debugging on your device. To enable USB debugging, simply enter the developer setting. Go to Settings>About Phone> and press the house number 7-8 times until Developer on appears. Once the developer options are enabled, you can go back to Settings> Developer Options> Enable USB debugging.
Step two: Let’s assume that you have already downloaded the latest versions of Odin and TWRP Recovery for your device from the sample area above. If the latest version of Odin does not work on your device or if you are experiencing problems, simply download the correct version of Odin.
Step three: Make sure you have already downloaded TWRP Recovery for your Samsung device. Then unzip the compressed Odin file on your computer and install the latest Samsung USB drivers on your computer.
Step four: When the device is turned off, press the ‘Power+Volume Down+Home’ buttons simultaneously and the device will enter the boot mode. If this key combination does not work for your device, search Google for this key combination for your device.
Fifth step. Now connect your Samsung device to your computer using a USB cable. Next, navigate to the folder where the Odin files were extracted and right-click on the Odin executable, then click Run as Administrator.
Step six: The interface should show something like ‘ID:COM’ below, and check the interface carefully below.
Seventh step: Note the ID:COM field and the empty field below it, which turns blue once the device has been detected. The device should be detected if the correct drivers are installed on the computer.
Step 8: Then just click on AP, then go to the firmware archive, find the .tar.md5 file and select it after clicking on AP.
ALWAYS remember how to root the Motorola Moto Z XT1650 and install TWRP Repair.
Message: There is a PIT zone in the re zone. Do not place files in the PIT section and make sure repartitioning is not enabled. Check the box and place a check next to Automatic restart and F. Time reset.
Step 9: Once the TWRP (.img) file is uploaded to the AP area and the vbmeta_disabled_R.tar / multidisabler file is uploaded to USERDATA, the flashing or installation process can begin. Be careful not to touch the USB cable while it is flashing.
Step 10: If all goes well, you will see a green PASS or RESET message at the end, indicating that the TWRP firmware process for your device has been successfully completed and that it now has TWRP Recovery. At this point the device will automatically reboot, don’t panic, this is normal.
Step 11: Now we have to disable the encryption. Go to Advanced > Terminal, type : Multidisciplinary. In the back cases, it may be necessary to reboot the multi-disk adapter. If the system indicates that there is free space on the device, it will try to resize the creator and ask you to restart the multidisc adapter. If this is the case, re-enter: multi-discretion. When the operation is complete, the message Done appears on the screen. Now go back to Clear > Format data > type yes. Now just reboot to recover.
You can now disconnect the device from the computer.
How to rote Samsung Galaxy S20 FE SM-G780F/DSM (r8s) to Android 11, One UI 3.1 – Install Magisk or SuperSU
Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then continue with the next steps.
Message: You can use Magisk Manager or Super SU, but only one, so choose wisely. Go to Magisk Manager if you are not sure.
Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Samsung Galaxy S20 FE SM-G780F/DSM smartphone.
Step two: Just get started on the recovery. You can also make a ROM backup via the TWRP interface. However, I recommend that you make a backup copy of the ROM. Because if the process fails, you can flash the ROM.
Step three: Click Install, then navigate to the SuperSU.zip or magisk.zip file and drag the firmware confirmation file (located at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds. Then select Reboot to restart the system.
Congratulations, you are now rooted on the Samsung Galaxy S20 FE SM-G780F/DSM and you have also installed TWRP. Now you can install Xposed Framework and customize your smartphone as you like. If you want to check it, you can download and check the root status through the Root Checker application.
frequently asked questions
Can the Samsung S20 be rooted?
If you have TWRP recovery installed on your Galaxy S20, you can easily root the phone by flashing Magisk ZIP. … In this case, you can easily root the Galaxy S20 by installing a patch for the AP firmware with Magisk and then flashing it to your phone with Odin.
Is the S20 better than the S20?
While the Galaxy S20 uses a 64-megapixel sensor that offers 3x hybrid zoom, the Galaxy S20 FE uses an 8-megapixel sensor combined with 3x optical zoom. … The Galaxy S20 FE has a larger 4,500mAh battery, but lowers the charging speed to 15W, compared to 25W for the S20.
What does the IP on the S20 mean?
In September, Samsung introduced its latest smartphone in the Galaxy S 2023 series: Samsung Galaxy S20 FE (FE – Fan Edition). As the name suggests, this phone offers what Samsung says is most important to Galaxy S fans.
root samsung s20 fe 5g,samsung galaxy s20 fe lineageos,sm-g981u root,s20 root,root s20 ultra snapdragon,xda s20 root,Feedback,Privacy settings,How Search works,s20 fe bootloader unlock,s20 fe xda